Scope of supply / Ironmongery
Scope of supply
Ironmongery
The hardware at every door: handles, hinges, locks and closers.
03Ranges
01
Ranges
Ironmongery ranges
| Ref | Range | Description | Location | Typical use | Open |
|---|---|---|---|---|---|
| I-01 | Lever handles and pulls | Lever handles on rose, pull handles and flush pulls. | — | Internal and entrance doors, joinery | |
| I-02 | Hinges and locks | Ball-bearing and concealed hinges, mortice locks and cylinders. | — | Every door schedule | |
| I-03 | Door closers and stops | Overhead and concealed closers, floor springs and door stops. | — | Entrances, corridors, offices |
02
Supply
All three categories are supplied on the same terms: specification-compliant, fully documented, sampled before order.
Test reports are requested against the standard the specification names. Those most often specified:
How manufacturers are approved| EN 1906 | Lever handles |
|---|---|
| EN 1935 | Single-axis hinges |
| EN 12209 | Locks and latches |
| EN 1303 | Cylinders |
| EN 1154 | Door closers |
| EN 1670 | Corrosion resistance |
| EN 1634-1 | Fire resistance of door sets |
Enquiries
Send a specification or a schedule.
Data sheets, samples, submittal packages and quotations.